Aluminum siding is one of the construction industry’s most used metal cladding systems. However, homeowners may sometimes want to change their metal panels and use new products. So, they will have to remove aluminum siding without damage and replace it with a new system.
Although removing aluminum siding can be tedious, it is not so complicated, and there is nothing particularly complex about the procedure. So, a standard DIY project can remove aluminum cladding without damage.
This type of aluminum cladding is generally installed over the old wood siding with very few modifications since it is more accessible, and removing wood panels is cost-prohibitive. So it is more likely that the wood panels are still underneath all the aluminum panels. However, when you want to remove aluminum siding without damage, you do not know the condition of the wooden boards under the aluminum sheets.
Removing aluminum siding is a worthwhile option if you want to cover some repairs to the original cladding system. However, before removing aluminum siding panels, you need to know that you will have repairs equivalent to your home’s envelope when removing aluminum cladding.
There are Two Perspectives on Removing Aluminum Siding:
- How to remove aluminum siding without damage
- How to remove aluminum sidings for the scrap yard
If you want to send your old aluminum siding to scarp yar, then the process is much easier since you can damage and tear the panels apart easily.
On the other hand, if you want to remove aluminum cladding without damage and reinstall it or replace it with other cladding materials such as ACM panels, you will have to be more precise.
Remove Aluminum Siding Without Damage For Reuse or Scrap Yard
As told, your precision in removing aluminum siding depends primarily on purpose. Here are 5 simple steps you need to follow to remove aluminum siding without damage for reusing or sending them to a scrap yard.
Step 1: Inspect the Aluminum Siding
The removing aluminum siding process starts with peeling back a corner of your aluminum cladding panels in a couple of areas and seeing what is going on beneath there. This will help you plan the work going forward efficiently and precisely.
Step 2: Peel The Panels Back to Remove Aluminum Siding Without Damage
It would be best if you were careful when you want to remove aluminum siding without damage. These metal cladding panels are very sharp and can cut you. So, you will have to put on a pair of working gloves.
Aluminum siding panels are nailed across the top of each panel, and the bottom section hooks into the top of the following board.
If you want to remove aluminum siding without damage, it is essential to use a metal clothes hanger and dig into the end of one of the aluminum panels allowing you to pull it off. Then pull the bottom section down and unzip that particular panel horizontally across the cladding system down to the other end. You can now pry out the nails that hold the panels with a pry bar and remove the aluminum siding without damage.
Step 3: Check the Nailing Channels and Trim to Remove Aluminum Siding Without Damage
Aluminum cladding systems have narrow channels on the outside and inside corners. You can pry these parts off by finding the nails that hold them. Generally, aluminum sidings that wrap over old wood trim are placed with aluminum nails. Prying out these nails can be challenging. However, starting with the corner is recommended since peeling the aluminum back is more accessible and letting the pins come with it.
Step 4: Aluminum Soffits
Another thing that gets covered up and turned into what appears to be aluminum soffits is the open eaves. Removing these soffits is very easy. Each board is attached with two small nails to the sides of the j-channel. You can remove the first one and yank the rest down with the claw side of your hammer before undoing the nails that hold the j-channel in the place.
Step 5: Aluminum Siding Insulation
Since aluminum sidings require additional insulation, it is likely to find Styrofoam or other insulation materials underneath the siding panels, which are nailed into the siding with larger roofing nails.
However, removing the insulation materials is simple since they are fragile and can easily be torn away from your building.